The Best Ways To Clean A Clogged Faucet Aerator

Posted on
How To Clean Your Faucet Aerator ZN Construction

Best Ways to Clean a Clogged Faucet Aerator


Having a clogged faucet aerator can be frustrating, as it can lead to reduced water flow and inefficient use of water. In this article, we will discuss the best ways to clean a clogged faucet aerator in the year 2023.

Why does a faucet aerator get clogged?

A faucet aerator can get clogged due to mineral deposits, sediment, or debris that accumulate over time. This can happen especially in areas with hard water.

Tools and materials you will need

To clean a clogged faucet aerator, you will need the following tools and materials:

  • Adjustable wrench or pliers
  • White vinegar
  • Small brush (e.g., toothbrush)
  • Bucket
  • Clean cloth or towel

Step-by-step guide to clean a clogged faucet aerator

Step 1: Turn off the water supply

Before you start cleaning the faucet aerator, it is important to turn off the water supply to avoid any accidental water leakage.

Step 2: Remove the aerator

Use an adjustable wrench or pliers to loosen and remove the aerator from the faucet. Be careful not to scratch the faucet surface during this process.

Step 3: Disassemble the aerator

Once the aerator is removed, disassemble it by separating the different components. This will make it easier to clean each part thoroughly.

Step 4: Soak the aerator in vinegar

Fill a bucket or container with white vinegar and place the aerator parts in it. Let them soak for about 30 minutes to dissolve any mineral deposits or debris.

Step 5: Scrub the parts

After soaking, use a small brush, such as a toothbrush, to scrub each part of the aerator. Pay extra attention to the mesh screen and the small holes where water flows through.

Step 6: Rinse and dry the parts

Once you have scrubbed all the parts, rinse them thoroughly with clean water to remove any vinegar residue. Dry them with a clean cloth or towel before reassembling the aerator.

Step 7: Reassemble and reinstall the aerator

Put the aerator back together by attaching the different components in the correct order. Make sure they are securely fastened. Then, reinstall the aerator onto the faucet.

Step 8: Turn on the water supply

Finally, turn on the water supply and check if the faucet aerator is working properly. You should notice an improvement in water flow and reduced clogging.


Cleaning a clogged faucet aerator is a simple task that can be done using basic tools and materials. By following the steps outlined in this article, you can ensure that your faucet aerator remains clean and free from clogs.

Leave a Reply

Your email address will not be published. Required fields are marked *