How To Remove A Stuck Sink Stopper

1 min read

How to Remove a Sink Stopper A Quick, Easy Guide

How to Remove a Stuck Sink Stopper


If you’re experiencing a clogged sink, one of the first things you should check is the sink stopper. Over time, sink stoppers can become stuck due to debris accumulation or mineral buildup. In this article, we will guide you through the process of removing a stuck sink stopper, allowing you to unclog your sink and restore its functionality.

Step 1: Gather the Required Tools

Before you begin, make sure you have the necessary tools on hand. You will need a pair of pliers, an adjustable wrench, a screwdriver, and a bucket or a towel to catch any water that may spill during the process.

Step 2: Remove the P-trap

The P-trap is the curved pipe located beneath the sink that connects the drain pipe to the main plumbing system. Place the bucket or towel underneath the P-trap to catch any water. Use the pliers or adjustable wrench to loosen and remove the nuts that secure the P-trap in place. Once the nuts are removed, carefully detach the P-trap from the sink drain.

Step 3: Locate the Sink Stopper

With the P-trap removed, you will now have a clear view of the sink stopper. Look for any visible screws or clips that hold the stopper in place. If there are any, use the appropriate tool to loosen and remove them.

Step 4: Disconnect the Linkage

Underneath the sink, you will find a rod or linkage that connects the sink stopper to the faucet handle. Use the screwdriver to loosen and disconnect this linkage. Once it is disconnected, you should be able to lift the sink stopper out of the sink.

Step 5: Clean the Sink Stopper

Inspect the sink stopper for any debris or mineral buildup. Use a brush or toothbrush to scrub off any dirt or grime. If there is mineral buildup, soak the stopper in a mixture of vinegar and water for a few hours to dissolve it.

Step 6: Reassemble the Sink Stopper

Once the sink stopper is clean, reattach the linkage underneath the sink. Make sure it is securely connected. Then, place the sink stopper back into the sink and reattach any screws or clips that hold it in place.

Step 7: Reinstall the P-trap

With the sink stopper in place, it’s time to reattach the P-trap. Slide the P-trap back onto the sink drain and tighten the nuts with the pliers or adjustable wrench. Make sure the P-trap is securely attached and there are no leaks.

Step 8: Test the Sink

Turn on the faucet and let the water run to test if the sink is draining properly. If the water drains without any issues, congratulations! You have successfully removed a stuck sink stopper and unclogged your sink.


Removing a stuck sink stopper may seem like a daunting task, but with the right tools and a step-by-step guide, it can be easily accomplished. By following the steps outlined in this article, you can unclog your sink and restore its functionality in no time. Remember to exercise caution and take your time during the process to avoid any damage to your sink or plumbing system.